[PN: 10/16 - DN: 50...1600]   with reduced bore Medium: Water,  Wastewater   Flange Adaptor for the connection of pipes with flange and pipes without flange connection. made of steel, ductile iron, UPVC, grey iron, asbestos cement and other.

[PN: 10/16 - DN: 50...600]   for various pipe outside diameters Medium: Water, Wastewater   VAG VARIplus-RC Coupling is designed to join pipes made of steel, ductile iron, UPVC, grey iron, asbestos cement and other materials. The coupling has a wide range tolerance on OD (up to 23 mm) and therefore can connect pipes of various outer diameters.

[W: 150...1000 - H: 150...1000]   Shut-off and control valve - four side sealing Medium: Wastewater   Shut-off and control penstock with a compact design (closed frame design); four-side sealing, made of stainless steel, for wall mounting. Especially sturdy design with separate sliding and sealing system. Suitable for use in wastewater applications, water treatment plants, in stormwater retention basins and in flood protection.

[PN: 10/16 - DN: 50...300]   Pressure reducing valve Medium: Water   Control valve with own-medium control for the regulation of pressure and flow rates in service areas without external power supply. Long service life due to the hard-faced and thus wear-resistant, corrosion- and infiltration-proof seat. The threaded steel sleeves pressed into the body (CORFIX) prevent uncovered spots of the casting and corrosion in the connections of the control lines. Suitable for use in water distribution applications and in pressure management.

[PN: 10/16/25 - DN: 50...200]   Single-chamber type Medium: Water   High-capacity, single-chamber air valve with triple function for venting and releasing air in pipelines as well as for releasing air during operation. Corrosion-proof due to stainless steel inner parts and float made of stainless steel. Safe and reliable operation even at high air-release velocities of up to sonic speed. Suitable for use in water treatment, water distribution, in dams, power plants and in industry.

[PN: 10/16/25 - DN: 200...1400]   Slanted Seat Tilting Disk Medium: Water / Wastewater / Sea water Metallic-sealing non-return valve with slanted seat for reducing the closing time and with specially shaped disk that supports the opening movement. Also available with internal damping unit for the reduction of pressure surges. The prerequisite for trouble-free operation is a minimum flow velocity of 1.5 m/s in the customer's plant. Suitable for use in water treatment applications, water distribution, in pretreated sewage, in power plants and in industry.

[PN: 6/10/16/25/40 – DN: 100…4000]   Epoxy. Medium: Water   Double-offset flanged butterfly valve (resilient-seated) with epoxy coating, available with long or short face-to-face length or made of welded steel for use in water applications. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion - and infiltration-proof seat with weld overlay. Suitable for use in water distribution, water treatment, in pretreated waste water, dams, in power plants, industry and in pressure management.

[JIN] WESAN WP G horizontal screw-wing large-diameter water meter is mainly used for the measurement of medium and large flow cold water in the water supply pipeline. Features Support horizontal installation and vertical installation Measuring movement can be calibrated individually Closed measuring movement to ensure higher measurement accuracy Dynamically balanced screw-wing movement with minimal pressure loss High-strength wear-resistant impeller to ensure maximum service life Copper sealed tempered glass sealed counter, protection class IP 68 The one-piece head can be rotated 350° for easy reading Integrated data transfer interface as standard Replaceable movement for easy on-site replacement without affecting measurement accuracy Replaceable communication module, easy to replace on site without affecting normal measurement

[1.3] A static water meter based on the ultrasonic technology, enables accurate calculation of water consumption and eliminates measuring deviations caused by sand, suspended particles or air pockets.

[DN15/20] A single-jet water meter designed for measuring cold water in main metering market, suitable for demanding installation conditions and sediment laden waters. Features DN15/20 Q3=2.5m3/h (DN15) / Q3=4m3/h (DN20) 4 MID approval up to R=160H & R=63V Starting flow rate: 3 l/h (DN15) / 8 l/h (DN20) Brass body High resistance to demanding water conditions (sand, iron) Compact and modular