VAG Valve

[PN: 10/16 – DN: 50…600]

Disk made of stainless steel – wafer-type
Medium: Water

Resilient-seated, wafer-type butterfly valve for flange mounting between pipeline flanges; disk with centric bearing; suitable for use in water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and disk with triple bearing. Suitable for use in water treatment, water distribution, in dams, power plants and in industry.

[PN: 10/16/25 – DN: 50…200]

Single-chamber type
Medium: Water

High-capacity, single-chamber air valve with triple function for venting and releasing air in pipelines as well as for releasing air during operation. Corrosion-proof due to stainless steel inner parts and float made of stainless steel. Safe and reliable operation even at high air-release velocities of up to sonic speed. Suitable for use in water treatment, water distribution, in dams, power plants and in industry.

[PN: 6/10/16/25/40 – DN: 100…4000]

Epoxy.
Medium: Water

Double-offset flanged butterfly valve (resilient-seated) with epoxy coating, available with long or short face-to-face length or made of welded steel for use in water applications. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion – and infiltration-proof seat with weld overlay. Suitable for use in water distribution, water treatment, in pretreated waste water, dams, in power plants, industry and in pressure management.

[PN10/16 – DN40…600]

Resilient-seated – short face-to-face length
Medium: Water / Wastewater / Seawater

Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 14 for water applications. Proven design with innovative improvements, such as sliding caps, guarantee low operating torques even after many years of use. Suitable for water-treatment applications, water distribution, in pressure management, in storm water retention basins, in dams, power plants and in industry.

[W: 150…1000 – H: 150…1000]

Shut-off and control valve – four side sealing
Medium: Wastewater

Shut-off and control penstock with a compact design (closed frame design); four-side sealing, made of stainless steel, for wall mounting. Especially sturdy design with separate sliding and sealing system. Suitable for use in wastewater applications, water treatment plants, in stormwater retention basins and in flood protection.

[W: 400…1800 – H: 400…1800]

Shut-off and control valve with self-contained frame design
Medium: Wastewater

Stainless steel shut-off and control valve with open or closed frame design for wall-mounting. Particularly sturdy design with a newly developed, patented sealing system. Suitable for applications with stringent requirements in terms of tightness in wastewater systems, in municipal sewage treatment plants, in storm-water retention basins, in flood and damage protection as well as in industrial sewage treatment plants and in power plants.

[PN: 10/16 – DN: 50…300]

Pressure reducing valve
Medium: Water

Control valve with own-medium control for the regulation of pressure and flow rates in service areas without external power supply. Long service life due to the hard-faced and thus wear-resistant, corrosion- and infiltration-proof seat. The threaded steel sleeves pressed into the body (CORFIX) prevent uncovered spots of the casting and corrosion in the connections of the control lines. Suitable for use in water distribution applications and in pressure management.

[PN: 10/16 – DN: 40…300]

Medium: Water / Wastewater / Sea water

Resilient-seated, slanted-seat check valve that opens even at low differential pressures. The disk can be used on both sides, which doubles its useful life. The one-piece and completely rubber-coated disk ensures a completely free passage and reduces the adhesion of dirt particles. Suitable for both horizontal and vertical installation in water treatment plants, in water distribution, in waste-water applications, in power plants and in industry.

[PN: 10/16/25 – DN: 200…1400]

Slanted Seat Tilting Disk
Medium: Water / Wastewater / Sea water

Metallic-sealing non-return valve with slanted seat for reducing the closing time and with specially shaped disk that supports the opening movement. Also available with internal damping unit for the reduction of pressure surges. The prerequisite for trouble-free operation is a minimum flow velocity of 1.5 m/s in the customer’s plant. Suitable for use in water treatment applications, water distribution, in pretreated sewage, in power plants and in industry.

[PN: 10/16 – DN: 50…2000]

for the same pipe outside diameters
Medium: Water, Wastewater

The Dedicated Coupling is designed to join pipes of the same outside diameter.

[DN: 100…2000]

for various pipe outside diameters
Medium: Water,  Wastewater

Flange Adaptor for the connection of pipes with flange and pipes without flange connection. made of steel, ductile iron, UPVC, grey iron, asbestos cement and other.

[PN: 10/16 – DN: 50…1600]

with reduced bore
Medium: Water,  Wastewater

Flange Adaptor for the connection of pipes with flange and pipes without flange connection. made of steel, ductile iron, UPVC, grey iron, asbestos cement and other.

[PN: 10/16 – DN: 50…600]

for various pipe outside diameters
Medium: Water, Wastewater

VAG VARIplus-RC Coupling is designed to join pipes made of steel, ductile iron, UPVC, grey iron, asbestos cement and other materials. The coupling has a wide range tolerance on OD (up to 23 mm) and therefore can connect pipes of various outer diameters.

[PN: 10/16 – DN: 50…600]

for various pipe outside diameters
Medium: Water,  Wastewater,  Sea water

The Flange Adaptor is designed to join pipes made of steel, ductile iron, UPVC, grey iron, asbestos cement and other materials with a flanged connection. The flange adaptor has a wide range tolerance on OD (up to 23 mm) and therefore can accommodate pipes of various outer diameters.