DIEHL Water meter

The IZAR System provides wireless and wired communication, allowing interoperability and media independence.

[DN15/20]
Compact and durable water meter, suitable for residential installation and supports the IZAR module for stable data transmission.

Features
DN15/20
Q3=2.5m³/h (DN15) / Q3=4m³/h (DN20)
MID approval up to R=800
Starting flowrate at 0.4 l/h
Composite & brass version
High dynamic range
Installation in any position
Optional dual-zone filter

[DN25/32/40]
The latest generation of volumetric meters developed within the framework of the MID and European standards to meet field requirements.

Features
DN25/32/40
Q3=6.3 m³/h (DN25/32), Q3=10 m³/h (DN25/32) and Q3=16 m³/h (DN40)
MID approval up to R=800 (Q3=6.3 m³/h), R=500 (Q3=10 m³/h) and R=1,000 (Q3=16 m³/h)
Starting flow rate at 1 l/h (Q3=6.3 m³/h), 2.9 l/h (Q3=10 m³/h) and 4 l/h (Q3=16 m³/h)
Brass body
Glass-copper register
Compact
Installation in any position

[DN50/65/80/100]
A bulk water meter designed for network metering and invoicing of substantial quantities of cold water.

Features
DN50/65/80/100
Q3=25m³/h (DN50) / Q3=40m³/h (DN65) /
Q3=63m³/h (DN80) / Q3=100m³/h (DN100)
Starting flowrate from 18 l/h
MID approval up to R=630 (DN 80 & 100)
Modular rotating flanges with pipe gaskets
High dynamic range

[DN50/65/80/100]
A bulk water meter designed for water network management and invoicing of substantial quantities of cold water.

Features
DN50/65/80/100
Q3=25m³/h (DN50) / Q3=40m³/h (DN65) /
Q3=63m³/h (DN80) / Q3=100m³/h (DN100)
MID approval up to R=800
Starting flow rate: 18 l/h (DN50)
Cast-iron body

[DN15/20]
A single jet water meter specifically designed for submetering market. It is characterised by its accurate metering capability, its ruggedness and versatility.

Features
DN15/20
Q3=1.6 m³/h and Q3=2.5 m³/h (DN15) / Q3=4 m³/h (DN20)
MID approval up to R=125H and R=63V
Starting flow rate : 6 l/h (DN15) / 12 l/h (DN20)
Brass and composite body
Integrated plastic inlet filter
Cold and hot water

[DN15/20]
A single-jet water meter designed for measuring cold water in main metering market, suitable for demanding installation conditions and sediment laden waters.

Features
DN15/20
Q3=2.5m3/h (DN15) / Q3=4m3/h (DN20) 4 MID approval up to R=160H & R=63V
Starting flow rate: 3 l/h (DN15) / 8 l/h (DN20)
Brass body
High resistance to demanding water conditions (sand, iron)
Compact and modular

[DN25/32/40]
A single jet water meter designed for main metering market, suitable for demanding installation conditions and sediment laden waters.

Features
DN25/32/40
Q3=6.3m³/h (DN25) / Q3=10m³/h (DN32) / Q3=16m³/h (DN40)
MID approval up to R=200H & R=80V
Starting flow rate: 9 l/h (DN25) / 15 l/h (DN32) / 25 l/h (DN40)
Brass body
High resistance to demanding water conditions (sand)
Compact and modular

[1.3]
A static water meter based on the ultrasonic technology, enables accurate calculation of water consumption and eliminates measuring deviations caused by sand, suspended particles or air pockets.

[GmbH]
A bulk water meter designed for measuring volumes of cold water (up to 50°C) in supply lines with high flow at low pressure loss.

[JIN]
WESAN WP G horizontal screw-wing large-diameter water meter is mainly used for the measurement of medium and large flow cold water in the water supply pipeline.

Features
Support horizontal installation and vertical installation
Measuring movement can be calibrated individually
Closed measuring movement to ensure higher measurement accuracy
Dynamically balanced screw-wing movement with minimal pressure loss
High-strength wear-resistant impeller to ensure maximum service life
Copper sealed tempered glass sealed counter, protection class IP 68
The one-piece head can be rotated 350° for easy reading
Integrated data transfer interface as standard
Replaceable movement for easy on-site replacement without affecting measurement accuracy
Replaceable communication module, easy to replace on site without affecting normal measurement